||Note: 1. KINDLY FURNISH THE ECS FORMAT, BANK DETAILS AND ONE RUPEE STAMP RECEIPT ALONG WITH EMD.
2. Post supply inspection in respect of supplies made is not permitted. Any offer containing the condition of post supply inspection will be out-rightly rejected. It is therefore, mandatory for the bidders, while quoting, to indicate in clear terms the requirement of post supply inspection by any outside agency.
|Sr. no||Item Category||Item Description||Qty|
|1||METALS||Structural steel grade ‘A’ angle, channel & beam sections conforming to IS: 2062 in random length of 5 to 7 meter.
Equal leg angle section of sizes
< 25 , 25 X 5
|2||METALS||< 40 , 40 X 6||1000|
|3||METALS||< 50 , 50 X 6||1800|
|4||METALS||< 75 , 75 X 8||125|
|5||METALS||Sloping flange channel section of sizes
|8||METALS||Flange beam of sizes
|10||METALS||Supply of hot rolled Carbon Steel killed, Grade ‘A’ plate conforming to IS 2062 of the following sizes and quantity.
6 meter X 1.5 meter X 50 mm
|11||METALS||6 meter X 1.5 meter X 25 mm ||4|
|12||METALS||3 meter X 1.5 meter X 12 mm ||5|
|13||METALS||3 meter X 1.5 meter X 10 mm ||15|
|14||METALS||3 meter X 1.5 meter X 6 mm ||10|
|15||METALS||Supply of cold rolled carbon steel Grade ‘O’ sheet conforming to IS 513: 1994 in the following size and quantity.
3 meter X 1.5 meter X 3 mm
|16||METALS||Supply of Aluminium 31000 pattern five chequered sheet conforming to IS 14712 in the following size and quantity.
2 meter X 1meter X 5 mm
|17||METALS||Supply of steel chequered plates conforming to IS 3502: 2009 in the following size and quantity.
3 meter X 1.5 meter X 10 mm
|18||METALS||3 meter X 1.5 meter X 6mm ||15|
|19||METALS||Supply of Plain Carbon Steel wire rod Grade En8D conforming to BS970 in the following size and quantities.
|26||METALS||Supply of Plain Carbon steel grade "B" seamless cold drawn heat teated plain end finished pipes in random length of
5-6 meters conforming to ASTMA 106 of the following sizes anquantity
20 NB Sch 40
|27||METALS||15 NB Sch40
Note: i) Supplier shall submit material test certificate giving information like chemical
composition & mechanical properties along with supply for each size, heat & lot No.
ii) Suppliers shall clearly mention his terms and conditions regarding part order acceptance. order acceptance offer
will not be considered.
iii) Supplier shall quote with minimum offer validity period of 120 days or above. Offers with lower validity period
will not be accepted. ||200|
||ASO, PREFRE STORES, TARAPUR