| Sr. no | Item Category | Item Description | Qty | | 1 | icatype | HSS Metric tap set M3 -M16 With tap wrench | 3 | | 2 | icatype | Set of HSS Drill bit From 6 mm to 20 mm (6/6.5/7/7.5/8/8.5/9/9.5/10/10.5/11/11.5/12/12.5/13/14/16/18/20 mm | 4 | | 3 | icatype | 6 Inch stainless steel Feeler gauge 26 blades 0.03mm -01 mm | 3 | | 4 | icatype | Set of Forged , chrome plated Double End open spanner Material of construction shall be chrome vanadium steel as per DIN 3110 & IS 2028. set shall include following metric sizes: 6x7, 8x9, 10x11, 12x13, 14x15,16x17, 18x19, 20x22, 21x23, 24x26, 25x27, 30x32, 30x36, 36x41, 41x46, 46x50, 32 X 36, 36 X 41, 41 X 46 46 X 50, 50x54. All items supplied shall be of reputed make complying with ISO 9001 QA standard | 3 | | 5 | icatype | Set of single end open end spanner with raised collar around the open end . Drop forged, crome vanadium steel conforming to DIN 894 & IS 2028. Set shall include following metric sizes :- 12,13,14,15,16,17,18,19,22,24,27,30,32,34,36,38,41,46,50,55 | 2 | | 6 | icatype | Set of pipe wrench 14, 24 & 36 inch complying with IS 4003 Part II - 1986 Jaw made from Drop forged from Chrome Molybdenum (Cr Mo) steel | 3 | | 7 | icatype | Plier set with accuratly machined & heat treated jaws 180 mm Circlip plier internal 180 mm Circlip plier external 10 inch Grip plier 180 mm Nose plier 250 mm combination pliers | 4 | | 8 | icatype | Set of socket spanner with ratchet ,L handles, Extension rods Socket Set 1/4" having Sockets-4,4.5,5,5.5,6,7,8,10,11,12,13,14 Adapter-Hex 1/4 x SQ, 1/4 Adapter Torx-T20,T25,T30,T40 Accesories-A733 - T-HANDLE, A 743- EXTN. BAR, A 753- EXTN. BAR,A 773- UNIVERSAL JOINT, A 703- NUT SPINNER FLEXIBLE,A 715- RATCHET HANDLE | 2 | | 9 | icatype | Set of Hammer :-Set of Hammer :-
1) BALL PIN HAMMER 300 gms with handle,
2) BALL PIN HAMMER 800 gm with handle
3) Soft Faced Hammer with Handle 240 gms Soft
4) Faced Hammer with Handle 320 gms
| 4 | | 10 | icatype | HOLE PUNCH SET 6,8,10,12,16,18,20,22,24,26,28,30 with MOC as High Speed Steel | 2 | | 11 | icatype | ALLEN KEY set of ( 1.5,2,2.5,3,4,5,6,8,10,12,16,19 mm) | 4 | | 12 | icatype | ALLEN KEY set of (1/6,5/64,3/32,1/8,5/32/,3/16,7/32,1/4,5/16,3/8) | 4 | | 13 | icatype | Carbon Steel Tool Box (Powder Coated or hot zinc dipped with Galvanized coating of min 700g/m2 or shall have two coat of zinc phosphate coat followed by one coat of aluminum or MIO based paint & two coat of acrylic paint. It shall comply with following specification: No of Compartments = 5 Nos Type = Cantilever type Product Dimensions minimum (LxBxH) = 16.5 x 8 x 8 inch Material of construction = Carbon Steel/ Stainless Steel Box Weight shall not be less than 5.2 Kgs | 3 | | 14 | icatype | Two part 500 gm Fast Set Steel Putty satisfying following condition :- Chemical Type Epoxy • Paste Mix Ratio, by volume – Resin : Hardener ::1 : 1 Mix Ratio, • by weight – Resin : Hardener ::100: 56.5 • Lap Shear Strength, ISO 4587 : Grit Blasted Mild Steel (GBMS) N/mm² 15(psi) (2,190) • Compressive Strength (psi @ 77°F) = 10800 • Tensile Strength on Grit Blasted Steel (psi) : 4600 • Shore Hardness Scale : D | 2 | | 15 | icatype | HSS Hacksaw blade set were 1 set is 30 blade each for: -
1). 18 TPI
2). 24 TPI
3). 32 TPI | 1 | | 16 | icatype | Paint Stripper spray can of 510 Gm Tech Spec : • Type : Solvent cleaner • Chemical Type : Methylene Chloride • Viscosity : Very low • Shall be able to remove following gasket : a. Baked- on gaskets and gasket cements from any type of metal surface b. Chemical formed- in-place gaskets, including RTV Silicone and anaerobic materials c. Gaskets From aluminum components without scraping or damaging machine surfaces d. Gaskets from Small to difficult- to-reach components e. High temperature Engine paints Prior to repairing f. Built- up Carbon deposits From interior engine/combustion surfaces g. Baked on grease and oil deposits h. Paint and varnish from wood /metal surfaces (excellent for removing surface coating from delicate wood, carved surfaces 10without scraping or damaging surfaces) | 10 | | 17 | icatype | Dual component, easy to use, steel-filled epoxy repair putty complying with : a)Compressive Strength, ASTM D695,N/mm2 = 82.7 b)Shear Strength ASTM D1002, N/mm2.125mm gap, acid etched aluminium = 4.8 c)Tensile Strength, ASTM D638, N/mm2 = 17.2 d)Hardness ASTM D-2240, Shore D = 80 e)shall be workable for 3 minutes andsets in 10 minutes | 10 | | | | |
|
|
