| Sr. no | Item Category | Item Description | Qty |
| 1 | None | Design, Manufacturing, Testing & inspection and supply of inert Gas Purification Towers for N-8 Pyroprocessing Facility.Inert Gas Purification Tower, Model-1, as per Detailed Specifications in Annexure (Section 9.10 of tender), complete set | 6 |
| 2 | None | Inert Gas Purification Tower, Model-2, as per Detailed Specifications in Annexure (Section 9.10 of tender), complete set | 6 |
| 3 | None | Molecular sieves, Zeolite 4A, 3 mm diameter cylindrical pellet, as per Detailed Specifications in Annexure (Section 9.10 of tender) | 100 |
| 4 | None | Molecular sieves, Zeolite 4A, 3.0 mm diameter spherical beads, as per Detailed Specifications in Annexure (Section 9.10 of tender) | 100 |
| 5 | None | Copper catalyst tablets 6 mm diameter, 3 mm pellet thickness, as per Detailed Specifications in Annexure (Section 9.10 of tender) | 200 |
| 6 | None | Double stage rotary vane pump + Pump Oil (as per technical specifications), Quantity of pump oil: 3 L for each pump and 40 L as spare, as per Detailed Specifications in Annexure (Section 9.10 of tender) | 6 |
| 7 | None | Spare K-type thermocouples (as per technical specifications), Note: The total quantity shall be distributed among different lengths of thermocouples based on operational requirement. This shall be taken into consideration while submitting the offer. | 100 |
| 8 | None | Spare SS 316 L ball valves, (as per technical specifications), ¼-inch, ferrule fitting type, designed for 6000 psig, as per Detailed Specifications in Annexure (Section 9.10 of tender) | 100 |
| 9 | None | Spare SS 316 L ball valves (as per technical specifications), ½-inch butt-weldable end, designed for 6000 psig, as per Detailed Specifications in Annexure (Section 9.10 of tender) | 100 |
| 10 | None | Spare cartridge heaters (as per technical specifications), 1.5 kW, 230 V, 50 Hz, single phase, as per Detailed Specifications in Annexure (Section 9.10 of tender) | 20 |
| 11 | None | Spare quartz insulated/glass cloth tape heaters (as per technical specifications), 1.5 kW, 230 V, 50 Hz, as per Detailed Specifications in Annexure (Section 9.10 of tender) | 50 |
| 12 | None | SS 316L heavy duty fasteners, corrosion resistant, M6 hexagonal bolts with nuts and washers, as per Detailed Specifications in Annexure (Section 9.10 of tender) | 200 |
| 13 | None | SS 316L heavy duty fasteners, corrosion resistant, M8 hexagonal bolts with nuts and washers, as per Detailed Specifications in Annexure (Section 9.10 of tender) | 200 |
| 14 | None | KF couplings, compatible to UHV applications, SS304L grade, electropolished. Each set shall consist of KF dummy flange + 1 No. of centering ring + 1 No. of viton O-ring + 1 No. of Aluminium clamp with wing nut. Each KF coupling shall be tested using MSLD for a leak rate of 1x10-8 mbar/lit.sec or better | 50 |
| 15 | None | Approved 2D manufacturing drawings (soft copy in CD) + As built 2D manufacturing drawings (soft copy in CD) + 3D CAD models of as built tower (soft copy in CD, pdf) + Test reports + inspection reports + reports from subcontractors + TPI report + stage-wise inspection report + final inspection report + reports as per QAP as final documentation in hard copy (hard bound) 3 copies | 3 |
| 16 | None | TPI charges for inspection for the complete duration of work | 1 |
| 17 | None | Testing and installation charges at the purchaser’s site (two stages), i). First stage: Delivery of 2 Nos. towers (fully assembled) for functional testing at the purchaser’s site (by the bidder witnessed by the purchaser), ii). Second stage: Delivery of 10 Nos. towers (fully assembled) for functional testing at the purchaser’s site (by the bidder witnessed by the purchaser) | 1 |
| 18 | None | Submission of all approved, as built drawings in CD | 1 |
| 19 | None | Final documentation report (hard bound, colour, 2 copies) with copy of PO, approved QAP, as-built drawings, test certificates, reports etc. | 1 |
| | | |
